中北大学学报（自然科学版）2012，Vol.33Issue(2)：107-110,125,5.DOI:10.3969/j.issn.1673-3193.2012.02.004
深孔单刃刚性铰刀工艺试验研究
Deep Test Technology of Single-Edge Rigid Reamer for Deep Hole Processing
摘要
Abstract
Single-edge high-speed cutting rigid hinge processing is auto-oriented and of low surface roughness. The elastic and plastic theories were employed to study the force acting on the guide block and the compression effect on the pore wall. The single rigid blade reamer works at two different states. The extrusion conditions of the reamer was analyzed. It was concluded that in order to obtain good surface quality, the ream must be processed in extrusion reaming state. The corresponding cutting parameters, cutting force and surface roughness were determined.关键词
深孔/单刃刚性铰刀/工艺/试验Key words
deep hole/single-blade rigid reamers/process/test分类
矿业与冶金引用本文复制引用
沈兴全,孟庆义,李耀明..深孔单刃刚性铰刀工艺试验研究[J].中北大学学报（自然科学版）,2012,33(2):107-110,125,5.基金项目
国家自然科学基金资助项目(51175482/E050901) （51175482/E050901）
