焊管2012，Vol.35Issue(7)：22-24,3.
环氧树脂涂层耐冲蚀性能研究
Research on Corrosion Resistance Performance of Epoxy Coating
李光照 1张阿昱 2冯拉俊3
作者信息
- 1. 陕西工业职业技术学院,陕西咸阳712000
- 2. 宝鸡石油钢管有限责任公司,陕西宝鸡721008
- 3. 国家石油天然气管材工程技术研究中心,陕西宝鸡721008
- 折叠
摘要
Abstract
The epoxy coating was obtained by adopting cold spraying, and corrosion resistance performance was analyzed through weight loss method and SEM. The result showed that the weight of corrosion specimen increases at beginning and then decreases, impact angle and pressure affects coating obviously, weight loss is directly proportional to corrosion pressure; under the same angle, the bigger corrosion pressure ia, the bigger weight loss rating; under the same pressure, the weigh loss rating of acute angle is bigger than that of right angle; on the conditions of acute angle, the surface morphology of coating shows cutting-wear and impact crushing; on the conditions of right angle, the surface morphology of coating shows impact crushing , and the cracks obviously caused from stress releasing which exists on coating surface.关键词
环氧树脂涂层/冲蚀/失重/表面形貌Key words
epoxy coating/ corrosion/ weight loss/ surface morphology分类
能源科技引用本文复制引用
李光照,张阿昱,冯拉俊..环氧树脂涂层耐冲蚀性能研究[J].焊管,2012,35(7):22-24,3.
