结构工程师2012，Vol.28Issue(3)：8-11,4.
建业里东区地下室深受弯构件设计
Deep Flexural Members Design of JianYeli Basement
李明1
作者信息
- 1. 华东建筑设计研究院有限公司,上海200002
- 折叠
摘要
Abstract
To meet the requirement of architecture utilizations, the concrete wall at B1 floor had to be used as transfer members, whose depth is one story height, to support the superstructure. According to Chinese Code for design of concrete structures, these transfer members should be deep flexural members. In this project, deep flexural members are divided into two kinds, one is cantilever, another is continuous beam. Member and joint of this two kinds of deep flexural members were analyzed and designed accorging to the strut-and-tie model method for deep beems in ACI 318M-05.关键词
钢筋混凝土/深受弯构件/拉—压杆模型/构件精细设计/节点设计Key words
reinforced concrete/deep flexural member/strut-and-tie model/member fine design/joint design引用本文复制引用
李明..建业里东区地下室深受弯构件设计[J].结构工程师,2012,28(3):8-11,4.
