涡旋压缩机型线数控加工分析及其进给速度的确定OA北大核心CSCDCSTPCD
The research of CNC processing analysis and feed rate determination of scroll compressor's type line
基于三菱M70数控系统,首先对涡旋型线理论及加工方法进行分析,着重探讨了C轴、X轴进给量与数控系统进给速度f与铣削速度f1的关系,并对涡旋定盘进行了精加工,实验结果表明其加工质量符合设计要求.
Baaed on Mitsubishi M70 NC system,firstly,the theoretical analysis of scroll-type lines and the processing methods have been made,and then focused on the study of the relationship between the C-axis,the X-axis with NC feed ratef. Finally,Mitsubishi M70 CNC was used on the fine milling of the scroll plate. The experiment has showed that the result is fine.
刘国平;宋红滚;刘强飞;胡瑢华
南昌大学机电工程学院,南昌330031南昌大学机电工程学院,南昌330031南昌大学机电工程学院,南昌330031南昌大学机电工程学院,南昌330031
机械制造
涡旋型线数控加工进给速度
type line of scroll NC machiningfeed rate
《现代制造工程》 2012 (5)
33-35,3
评论