可再生能源2012，Vol.30Issue(9)：85-89,5.
锯末制备生物质成型燃料的试验研究
Experimental study on preparation of biomass briquette fuel by sawdust
李强 1陈铁军 1饶发明 2丁春江 1李圣辉1
作者信息
- 1. 武汉科技大学资源与环境工程学院,湖北武汉430000
- 2. 武汉钢铁集团矿业有限责任公司乌龙泉矿,湖北武汉430000
- 折叠
摘要
Abstract
Biomass briquette fuel was prepared by sawdust in the techniques of cold briquetting and carbonized briquetting. The effects of material moisture content and forming pressure of cold briquetting technique on forming properties of the briquette fuel was studied- The results show that the product biomass briquette fuel' has a good forming properties when material moisture content was 12%～16% and forming pressure was 60 MPa, and the density was 0.94 g/cm3 and shatter strength was 99%. The effect of mix moisture content, anthracite ratio, addition of J binder and forming pressure of carbonized briquetting technique on forming properties of the briqiiette fuel was stuied. The experiments results show that the product superior biomass briquette fuel has a good forming properties when anthracite ratio was 50%, mix moisture content was 30%, addition of J binder was 8%, forming pressure was 45 MPa, and the density was 0.93 g/cm3 and shatter strength was 99.3%,关键词
锯末/残炭/冷压成型/炭化成型/生物质成型燃料Key words
sawdust/ residual carbon/ cold briquetting/ carbonized briquetting/ biomass briquette fuel分类
能源科技引用本文复制引用
李强,陈铁军,饶发明,丁春江,李圣辉..锯末制备生物质成型燃料的试验研究[J].可再生能源,2012,30(9):85-89,5.
