电子科技2012，Vol.25Issue(10)：70-73,4.
基于FPGA和NAND Flash的存储器ECC设计与实现
ECC Design Based on FPGA and NAND Flash Memory
邢开宇 1曹晓曼 1方火能1
作者信息
- 1. 西安电子科技大学电子工程学院,陕西西安710071
- 折叠
摘要
Abstract
A certain high speed and large capacity storage system is designed using NAND Flash K9WBG08U1M as its storage media.Though NAND Flash is considered to be one of the most reliable storage medium,there is still small probability of single bit error.To detect and correct this error,an Error Correcting Code(ECC) algorithm system is designed and implemented in the Xilinx FPGA XC4VLX80,which is used as the core control chip of the storage system.Through comparing the two ECC codes calculated from the stored data during read and write operation,bit error can be located and corrected,and the correcting capability is 1 bit/4 kB.The ECC algorithm has the advantages of good correcting capability,less resources requirement and high speed.The design has already been applied in a satellite system to ensure the reliability of the storage system.关键词
FPGA/NAND/Flash/ECC算法Key words
FPGA/NAND flash/ECC algorithm分类
信息技术与安全科学引用本文复制引用
邢开宇,曹晓曼,方火能..基于FPGA和NAND Flash的存储器ECC设计与实现[J].电子科技,2012,25(10):70-73,4.
