| 注册
首页|期刊导航|林产化学与工业|打浆对烟梗纤维成纸性能的影响

打浆对烟梗纤维成纸性能的影响

曾健 陈克复 谢剑平 许光 李军 饶国华 杨飞 高文花

林产化学与工业2012,Vol.32Issue(5):101-105,5.
林产化学与工业2012,Vol.32Issue(5):101-105,5.

打浆对烟梗纤维成纸性能的影响

Effect of Pulping on the Properties of the Paper Prepared from Tobacco Stem

曾健 1陈克复 2谢剑平 2许光 3李军 1饶国华 2杨飞 1高文花2

作者信息

  • 1. 广东中烟工业有限责任公司技术中心,广东 广州 510145
  • 2. 华南理工大学 制浆造纸工程国家重点实验室,广东 广州 510640
  • 3. 郑州烟草研究院,河南 郑州 450001
  • 折叠

摘要

Abstract

Reconstituted tobacco sheet made from tobacco stem was prepared by a paper-making method. Effect of extraction on variation of several chemical components in tobacco,and influence of pulping on the morphology and physical properties of tobacco stem pulp fiber were studied in this paper. The results indicated that the contents of water soluble sugars,total alkaloid,chloride and total nitrogen in tobacco stem decreased after extraction. The mass fraction of holocellulose was relative increased 12.4 %. With the increasing of beating degree of tobacco stem pulp from 10 degree to 48 degree,fiber lengths of the tobacco stem pulp decreased from 1. 62 mm to 0. 36 mm,and the contents of the fines increased from 6. 90 % to 37. 17 % ; tensile index firstly increased from 13. 39 N · m/g to 33.20 N · m/g and then decreased to 30.94 N · m/g; tear index decreased from 1.54 mN · mVg to 0.88mN·m2/g,bulk decreased from 2.08cm3/g to 1.43 cm3/g; air permeability decreased from 59.58 μm/(Pa·s) to 0.03μm/( Pa·s) ; burst index increased from 0. 88 kPa·m2/g to 1.63 kPa·m2/g.

关键词

烟梗/打浆/纤维形态/物理性能/扫描电镜

Key words

tobacco stem/beating/fiber morphology/physical properties/SEM

分类

化学化工

引用本文复制引用

曾健,陈克复,谢剑平,许光,李军,饶国华,杨飞,高文花..打浆对烟梗纤维成纸性能的影响[J].林产化学与工业,2012,32(5):101-105,5.

基金项目

广东中烟工业有限责任公司技术中心项目(粤烟工05XM-QK[2010]034) (粤烟工05XM-QK[2010]034)

林产化学与工业

OA北大核心CSCDCSTPCD

0253-2417

访问量0
|
下载量0
段落导航相关论文