| 注册
首页|期刊导航|塑料科技|相容剂马来酸酐-苯乙烯接枝聚丙烯的制备及性能研究

相容剂马来酸酐-苯乙烯接枝聚丙烯的制备及性能研究

田政 潘莉莎 熊亚林 徐鼐 庞素娟 林强 陈龙敏 杨晓伟

塑料科技2012,Vol.40Issue(9):84-89,6.
塑料科技2012,Vol.40Issue(9):84-89,6.

相容剂马来酸酐-苯乙烯接枝聚丙烯的制备及性能研究

Study on the Properties of Polypropylene Grafted with Maleicanhydride and Styrene and Its Preparation

田政 1潘莉莎 1熊亚林 1徐鼐 1庞素娟 1林强 2陈龙敏 3杨晓伟3

作者信息

  • 1. 热带岛屿资源先进材料教育部重点实验室,海南大学材料与化工学院,海南海口570228
  • 2. 海南师范大学化学与化工学院,海南海口571158
  • 3. 欣龙控股(集团)股份有限公司,海南海口570125
  • 折叠

摘要

Abstract

Polypropylene grafted with maleic anhydride and styrene(PP-g-(MAH-co-St)was prepared by melt grafting,the effects of monomer content,initiator content,reaction temperature,reaction time on the grafting rate(GMAH),melt flow rate(MFR) and tensile strength of PP-g-(MAH-co-St) were investigated,and PP-g-(MAH-co-St) was characterized by FTIR.The results show that: when the mass fraction ratio of PP:MAH:St:DCP is 100:6:6:0.4,reaction temperature is 180°c and reaction time is 3 min,the GMAH,MFR and the tensile strength of PP-g-(MAH-co-St) is 1.51%,55.28 g/10min,and 26.72 Mpa respectively.Infrared analysis shows that MAH and St have been grafted onto PP.

关键词

相容剂/马来酸酐/苯乙烯/聚丙烯/熔融接枝/固相接技

Key words

Compatibilizer/Maleican hydride/Styrene/Polypropylene/Melt grafting/Solid-phase grafting

分类

化学化工

引用本文复制引用

田政,潘莉莎,熊亚林,徐鼐,庞素娟,林强,陈龙敏,杨晓伟..相容剂马来酸酐-苯乙烯接枝聚丙烯的制备及性能研究[J].塑料科技,2012,40(9):84-89,6.

基金项目

国家非织造材料工程技术研究中心开放课题(KFKT2012) (KFKT2012)

海南省自然科学基金(212020)海南大学青年基金项目(qnjj1167) (212020)

塑料科技

OA北大核心CSTPCD

1005-3360

访问量3
|
下载量0
段落导航相关论文