中国计量学院学报2012，Vol.23Issue(3)：284-288,5.
基于有限元的丝网张力计受力分析
Force analysis of silk tension meters based on finite element method
沈钰 1马丙辉 2李东升1
作者信息
- 1. 中国计量学院计量测试工程学院,浙江杭州310018
- 2. 浙江省计量科学研究院,浙江杭州310013
- 折叠
摘要
Abstract
The finite element membrane unit was used to simulate the silk screen. Then the load distribution of the tension meter was simplified according to its working principle and a silk stress state model was established under the combined action of silk and silk tension meter. ANSYS was used for simulation analysis to obtain the influence of silk size and the location of the measuring point in silk tension measurement, thus providing supporting data to use the silk tension meter properly. Finally, it was compared with the actual tension measurement results. They are consistent with each other and verifies the correctness of the simulation analysis.关键词
丝网张力计/张力的有限元分析/张力测量Key words
silk tension meter/ finite element analysis of tension/ tension measurement分类
通用工业技术引用本文复制引用
沈钰,马丙辉,李东升..基于有限元的丝网张力计受力分析[J].中国计量学院学报,2012,23(3):284-288,5.
