爆破器材2012，Vol.41Issue(5)：5-8,4.
实验室聚能高速碎片生成装置设计与研究
Design and Research of Laboratory Hypervelocity Debris Launcher Based on Shaped Charge
李志龙 1徐全军 1姜楠 1白帆1
作者信息
- 1. 解放军理工大学工程兵工程学院 江苏南京,210007
- 折叠
摘要
Abstract
Ground hypervelocity simulation experiment is the most economical and effective means for studying the space micro-debris impact effect. The existent space debris launcher is not safe enough to use in the laboratory. This paper researched and designed a conical shaped charge with an inhibitor, which was equipped with a protecting shell and thus enables to apply in the laboratory, to simulate the hypervelocity space debris. According to the simulation results, an experimental device was installed to measure the speed of the tip. The results show that the speeds of the tip are 10.52 km/s and 10.62 km/s, which are consistent to that of 11.385 km/s simulated by the AUTODYN software. The protecting shell of the device is relatively integrated, which realizes simulating the hypervelocity space debris in the laboratory.关键词
高速碎片/聚能射流/占据体/防护壳体Key words
hypervelocity debris/shaped charge/inhibitor/protecting shell分类
信息技术与安全科学引用本文复制引用
李志龙,徐全军,姜楠,白帆..实验室聚能高速碎片生成装置设计与研究[J].爆破器材,2012,41(5):5-8,4.
