爆炸与冲击2012，Vol.32Issue(5)：542-546,5.
网络爆轰驱动飞片的设计技术
Design of driving planar flyer by network detonation technique
摘要
Abstract
New equipment which could drive a planar flyer via the network detonation technique to generate low impact stress and low impact velocity was designed. The velocity and planarity of the flyer and the other equipment parameters were analyzed by using experimental measurement and numerical simulation. Results indicate that the equipment could drive the high-purity OFHC flyer with 100-mm diameter and 3-mm thickness approaching a stable velocity after about 2 mm flight. The velocity of the flyer is continuously adjustable from about 200 to 350 m/s with good planarity and uniformity. The network detonation-loading method can be used to launch a flyer plate at low velocity.关键词
爆炸力学/冲击加载/网络/爆轰/飞片Key words
mechanics of explosion/ explosive-loading/ network/ detonation/ flyer分类
数理科学引用本文复制引用
张友君,谷岩,裴晓阳,杜金梅,杨佳,喻寅..网络爆轰驱动飞片的设计技术[J].爆炸与冲击,2012,32(5):542-546,5.基金项目
中国工程物理研究院科学技术发展基金项目(2011A0201002) （2011A0201002）
