长江科学院院报2012，Vol.29Issue(11)：108-112,5.DOI:10.3969/j.issn.1001-5485.2012.11.024
基于ADINA的面板堆石坝三维子模型法研究
ADINA-Based 3-D Submodel Method for Concrete-Faced Rock-fill Dam
摘要
Abstract
The size joints on the of upstream panel of concrete-faced rock-fill dam differs greatly from that of the whole dam model, and the deformation is discontinuous, so that the solution is difficult to obtain and the precision is inadequate in finite element calculation. The concrete panel and the surrounding toe board are isolated from the whole dam model as a new research object by using sub-model method in software ADINA. The advantage of the sub-model method is that it can be implemented easily, and fine unit and grid can be employed to get higher accuracy of computing solution. Meanwhile, vertical joints and peripheral joints on the panel and the connection between the panel and the cushion layer can also be simulated in detail. An engineering project is taken as an example to verify the high accuracy and rationality of this method. The regularity of deformation of the panel and the joints are discussed.关键词
面板堆石坝/子模型法/垂直缝/周边缝Key words
rock-fill dam/ sub-model method/ vertical joints/ peripheral joints分类
建筑与水利引用本文复制引用
许晓亮,王乐华,邓华锋,朱敏..基于ADINA的面板堆石坝三维子模型法研究[J].长江科学院院报,2012,29(11):108-112,5.基金项目
国家科学基金资助项目(90610029) （90610029）
湖北省自然科学基金计划项目(2008CD366) （2008CD366）
