电焊机2012，Vol.42Issue(10)：38-43,6.
不同容量逆变器并联控制系统分析
Control analysis of parallel inverters with different ratings
李国洪 1张丽娟 1何易桓2
作者信息
- 1. 天津理工大学自动化学院,天津300384
- 2. 重庆检修分公司,重庆400039
- 折叠
摘要
Abstract
In view of different capacity inverters in parallel,the droop control parallel methods are adopted,Inverter modules with no control interconnections,without interference,output capacity is expanded,system reliability is enhanced.Also two single-phase full bridge inverters are researched.The voltage and inductance current double closed-loop control are adopted besides the drive method of the hysteresis control bipolarity PWM.The droop control parallel method is adopted.Through the analysis of principles,different capacity inverter parallel condition and droop coefficient is obtained.The new droop coefficient is also obtained by the way of power decoupling control.At last,two inverters system's static,dynamic and redundancy Characteristic and the control scheme are proved by MATLAB simulation analysis.关键词
逆变器/并联/比例/容量Key words
inverter/parallel/proportion factor/capacity分类
矿业与冶金引用本文复制引用
李国洪,张丽娟,何易桓..不同容量逆变器并联控制系统分析[J].电焊机,2012,42(10):38-43,6.
