大连理工大学学报2012，Vol.52Issue(6)：823-828,6.
7050铝合金最终形变热处理工艺优化
Optimization of final thermo-mechanical treatment process on 7050 aluminum alloy
摘要
Abstract
Final thermo-mechanical treatment(FTMT) process of electromagnetic continuous casting 7050 aluminum alloy is optimized.A proper FTMT process is given as follows : pre-aging 105℃ / 8h,cold rolling 20% and final aging 140 ℃ / 14h.On the basis of this process,the comprehensive properties of workhardening and precipitation-hardening can be fully improved.The experimental results show that tensile strength and yield strength respectively reaches 631.28MPa and 611.80MPa,and elongation rate is 14.68%.关键词
7050铝合金/最终形变热处理/显微组织/性能Key words
7050 aluminum alloy/final thermo-mechanical treatment(FTMT)/microstructure/properties分类
矿业与冶金引用本文复制引用
曹志强,冯亚利,王同敏,李廷举..7050铝合金最终形变热处理工艺优化[J].大连理工大学学报,2012,52(6):823-828,6.基金项目
国家自然科学基金资助项目 （）
高等学校博士学科点专项科研基金资助项目 （）
