南京航空航天大学学报2012，Vol.44Issue(5)：754-761,8.
单颗磨粒切厚均匀化实现脆性材料延性域磨削技术
Ductile Regime Grinding of Brittle Material with Unifying Undeformed Chip Thickness of Grain Cutting Edge
摘要
Abstract
In grinding of brittle materials, it is easy to produce quality problem such as surface/subsurface damage during machining and the machining efficiency is low. This can be a bottleneck of the commercial mass production of brittle materials. The paper proposes a new process principle, which uses the grinding tool with orderly distributed grains and precision dressing to unify the undeformed chip thickness. From this method, every grain can be made suitable for ductile cutting, then the ductile grinding can be realized. Accordingly, the paper produces monolayer brazed super abrasive grinding tools, and conducts a series of experiment including dressing and grinding. Finally, a ductile surface of Zirconia ceramic is achieved. The experiment proves that this process principle is liable, effective and operable.关键词
脆性材料/延性域磨削/单层钎焊砂轮/单颗磨粒切厚Key words
brittle materials/ ductile regime grinding/ monolayer brazed grinding wheel/ undeformed chip thickness of grain cutting edge分类
矿业与冶金引用本文复制引用
傅玉灿,张贝,徐鸿钧,苏宏华..单颗磨粒切厚均匀化实现脆性材料延性域磨削技术[J].南京航空航天大学学报,2012,44(5):754-761,8.基金项目
国家重点基础研究发展计划(“九七三”计划)(2009CB724403)资助项目. （“九七三”计划）
