强激光与粒子束2012，Vol.24Issue(12)：2987-2990,4.DOI:10.3788/HPLPB20122412.2987
平行束缪子透射成像蒙特卡罗模拟
Simulation of parallel muons transmission imaging using Monte Carlo method
摘要
Abstract
The Monte Carlo method-based Geant4 program is used to simulate the parallel rauons (which are perpendicular to the ideal detectors) injecting into the French Test Object (FTO) model. Six ideal detectors, three over the model and three under it, are used to output the positions of rauons, with which the incident and scattered muons tracks can be determined. Different transmission images of the FTO model can be obtained through calculating the transmission ratio before and after the model with three methods. The resolution of the first method and the second method is 2 mm×2 mm, while the resolution of the third method is 1 mm×1 mm and the edge of Cu and W can be distinguished obviously. Even the air sphere in the center of the FTO model can be observed visibly. Through all the three methods, the boundaries of the FTO model and the air outside it are very clear. The simulation results of transmission imaging indicate that the methods of parallel incident muons is feasible and practicable.关键词
蒙特卡罗方法/平行束缪子/透射成像/法国试验客体模型Key words
Monte Carlo method/ parallel muons/ transmission imaging/ French Test Object model分类
信息技术与安全科学引用本文复制引用
以恒冠,曾志,王学武,程建平,李君利..平行束缪子透射成像蒙特卡罗模拟[J].强激光与粒子束,2012,24(12):2987-2990,4.基金项目
国家自然科学基金项目(11035002) （11035002）
