| 注册
首页|期刊导航|应用化学|合成方法对纳米Ce-Zr-Al高温稳定性及储氧性能的影响

合成方法对纳米Ce-Zr-Al高温稳定性及储氧性能的影响

陈去非 潘喜强 赵振波 杨向光

应用化学2012,Vol.29Issue(11):1297-1301,5.
应用化学2012,Vol.29Issue(11):1297-1301,5.DOI:10.3724/SP.J.1095.2012.20001

合成方法对纳米Ce-Zr-Al高温稳定性及储氧性能的影响

Effect of Synthetic Method on Thermal Stability and Oxygen Storage Capacity of Ce-Zr-Al Nanocomposite

陈去非 1潘喜强 2赵振波 2杨向光1

作者信息

  • 1. 长春工业大学化学与生命科学学院 长春 130022
  • 2. 中国科学院长春应用化学研究所绿色化学与过程实验室 长春 130022
  • 折叠

摘要

Abstract

CeO2-ZrO2 solid solution is an indispensable oxygen storage material for the three way catalyst to control the pollution gas emission from automobiles. In this paper, three series of Ce-Zr-Al nanocomposite (ACZ) was prepared by citrate acid sol-gel method, sol assistant co-precipitation and sol co-precipitation, respectively. The obtained samples were calcinated at 1000 t for 4 h to test the thermal stability and oxygen storage capacity ( OSC). The effect of synthetic methods on these properties was investigated by means of X-ray diffraction ( XRD ) , Brunauer Emmett Teller ( BET) specific surface area ( SSA ) and H2 temperature-programmed reduction ( H2 -TPR). The results revealed that the thermal stability and oxygen storage capacity of all the ACZ were improved compared to the pure CeO2-ZrO2 solid solution. The molar proportion of Al doped in ACZ is 5, 10, 5 for citrate acid sol-gel method, sol assistant co-precipitation and sol co-precipitation, respectively. ACZ prepared by citrate acid sol-gel method had the highest oxygen storage capacity (717. 5 μmol/g-CeO2) , account for 49. 3% of the theoretical maximum.

关键词

铈锆固溶体/纳米复合体/热稳定性/溶胶凝胶法/储氧量

Key words

Ce-Zr solid solution/ nanocomposite/ thermal stability/ sol-gel method/ oxygen storage capacity

分类

化学化工

引用本文复制引用

陈去非,潘喜强,赵振波,杨向光..合成方法对纳米Ce-Zr-Al高温稳定性及储氧性能的影响[J].应用化学,2012,29(11):1297-1301,5.

基金项目

国家高技术研究发展计划(863计划,2011AA03A406) (863计划,2011AA03A406)

应用化学

OA北大核心CSCDCSTPCD

1000-0518

访问量0
|
下载量0
段落导航相关论文