重型机械Issue(5)：50-53,4.
板材取样剪剪切过程数值模拟及实验研究
Numerical stimulation and experimental study on shearing process of sampling shear of plates
丁小凤 1双远华 2胡建华2
作者信息
- 1. 太原科技大学机械电子工程学院,山西太原030024
- 2. 太原科技大学材料科学与工程学院,山西太原030024
- 折叠
摘要
Abstract
The shearing process of metal sheets is a complex large plastic deformation process. According to the deformation characteristics in shearing process, a finite element model for metal plate shearing was established with ANSYS/LS-DYNA software, and the elastic-plastic finite element analysis was done. The stress-strain states, deformation and force-energy parameters were obtained through simulation calculation. The shearing force was tested on the sampling shear in a certain steel firm. The test result showed that the simulation result is reliable and can be used as a basis for the design and manufacture of sampling shear.关键词
取样剪/ANSYS/LS-DYNA/测试Key words
sampling shear/ANSYS/LS-DYNA/test分类
矿业与冶金引用本文复制引用
丁小凤,双远华,胡建华..板材取样剪剪切过程数值模拟及实验研究[J].重型机械,2012,(5):50-53,4.
