空军工程大学学报（自然科学版）2012，Vol.13Issue(6)：71-74,4.DOI:10.3969/j.issn.1009-3516.2012.06.015
平面六杆机构优化设计与运动仿真
Optimization Design of Planar Six-bar Linkage and Motion Simulation
龚小平1
作者信息
- 1. 空军工程大学理学院,陕西西安,710051
- 折叠
摘要
Abstract
Taking that the slide block in planar six-bar linkage is at the minimum rate fluctuation in working stroke for the pursuit of goals, and taking the existence of the crank and good transmission property for constraint conditions, a mathematical model of optimal design is set up and optimization design calculation is done by the application of the constrained variable metric optimization algorithm to obtain the mechanism size parameters. In Solid-Works software the three-dimensional model of assembly for the mechanism is built, and by using COSMOS-Motion plug-ins the motion simulation is done to put out the kinematic animation video, lines and other sports information, which provide a visual way for the optimal design of planar linkage. Simultaneously the above can be used to test or to determine the mathematical model of the mechanism optimum design, the correctness and rationality of the program design and the calculation results, and also provide a reference for the simulation design of other mechanisms.关键词
平面六杆机构/优化设计/SolidWorks/COSMOSMotion/运动仿真Key words
planar six-bar linkage optimization design/ Solid-Works/ COSMOS-Motion/ motion simulation分类
机械制造引用本文复制引用
龚小平..平面六杆机构优化设计与运动仿真[J].空军工程大学学报（自然科学版）,2012,13(6):71-74,4.
