电力系统自动化2013，Vol.37Issue(2)：36-42,48,8.DOI:10.7500/AEPS201208181
含分布式电源配电网的故障定位
Fault Location for Distribution Systems with Distributed Generations
刘健 1张小庆 1同向前 2张志华 1杜红卫 3陈宜凯1
作者信息
- 1. 陕西电力科学研究院,陕西省西安市710054
- 2. 西安理工大学自动化与信息工程学院,陕西省西安市710048
- 3. 南瑞集团公司,江苏省南京市210003
- 折叠
摘要
Abstract
In order to solve the problem of fault location for distribution systems with distributed generation (DG), the fault current behavior of various DGs and the short-circuit current of the distribution systems with DGs are analyzed. The feasibility of the traditional fault location approach based on the information of overcurrent for distribution systems with DGs is investigated. An improved fault location process is proposed for overhead line based feeders, in which the reclosing procedure and the escape of DGs in case of fault situation are coordinated. Conclusions are drawn on DG connected to the bus and DG connected to the feeders based on cables with an appropriate limit to the total capacity, the fault can be identified with the traditional overcurrent based criteria. As for the case of DG connected to the overhead line based feeder of a rather long distance, it is necessary to utilize the improved fault location process proposed.关键词
配电网/配电自动化/分布式电源/短路电流/故障定位Key words
distribution network/ distribution automation/ distributed generator/ short-circuit current/ fault location引用本文复制引用
刘健,张小庆,同向前,张志华,杜红卫,陈宜凯..含分布式电源配电网的故障定位[J].电力系统自动化,2013,37(2):36-42,48,8.
