化工学报2013，Vol.64Issue(2)：756-764,9.DOI:10.3969/j.issn.0438-1157.2013.02.048
聚乙烯及其复合管道安全检测与评价方法
Development of non-destructive testing and safety assessment of polyethylene and composite pipes
摘要
Abstract
Polyethylene (PE) and its composite pipes have been widely used in the transportation of energy, such as natural gas and petroleum. Pipe welding joints have been proven to be a weak link of the whole pipeline. This means that non-destructive testing (NDT) and safety assessment of these joints are key technologies to guarantee safety of pipeline. In this paper, the theory and method of NDT technology on welding joint of PE pipes, inspection technique of cold welding and safety assessment of welding joints containing defects are introduced. Ultrasonic phased array and coupling focusing technology are applied in the inspection of electrofusion and butt-fusion joints of PE pipes respectively. Figures with inspecting image and cross section of practical joint are given. A cold welding inspection method based on ultrasonic phased array technology was invented, which has clear physics concept and is convenient in application. The defects in the electrofusion joints of PE pipe are classified into four categories: poor fusion interface, over welding, voids and structural deformity. Mechanical tests of joints with different kind of defects show that there are three main failure modes of EF joint under inner pressure, that is, cracking through the fusion interface, cracking through the fitting, and cracking through copper wire interface. A safety assessment method was proposed based on the experimental and analytical results. The proposed method can greatly improve intrinsical safety of such pipeline.关键词
聚乙烯管/复合管/焊接接头/无损检测/安全评定Key words
polyethylene pipe/composite pipe/welding joint/non-destructive testing/safety assessment分类
化学化工引用本文复制引用
施建峰,郭伟灿,师俊,钟思嘉,郑津洋..聚乙烯及其复合管道安全检测与评价方法[J].化工学报,2013,64(2):756-764,9.基金项目
国家科技支撑计划项目(2011BAK06B01). （2011BAK06B01）
