金刚石与磨料磨具工程2012，Vol.32Issue(3)：12-17,6.
PCD、PCBN复合片的电火花线切割加工质量
Processing quality of PCD and PCBN compacts by wire electric discharge machining
摘要
Abstract
Some typical kinds of PCD and PCBN compacts were selected to be machined by LS-WEDM, a series of processing tests were taken. After machining, the surface roughness of cutting section, the machining quality of cobalt-rich interface layer and the edge of superhard material layer were observed by 3D optical surface profiler and optical microscope. The results showed that machining quality was affected by superhard abrasive particle size and concentration greatly, a better machining quality could be obtained after several processes of LS-WEDM; The minimum grinding allowance of PCD cutting tools can be controlled within 4-15 μm after LS-WEDM, and within 10 |xm for PCBN BNX20, while BZN6000 needs a large follow-up workload of sharpening.关键词
聚晶金刚石/聚晶立方氮化硼/金刚石复合片/电火花线切割Key words
polycrystalline diamond ( PCD ) /polycrystalline cubic boron nitride ( PCBN ) /polycrystalline diamond compact (PDC) /wire electric discharge machining (WEDM)分类
化学化工引用本文复制引用
宋满仓,张建磊,王华,于超,王敏杰,刘冲..PCD、PCBN复合片的电火花线切割加工质量[J].金刚石与磨料磨具工程,2012,32(3):12-17,6.基金项目
国家自然科学基金重大项目(20890024),国家重点基础研究发展计划(2007CB714502) （20890024）
