| 注册
首页|期刊导航|金刚石与磨料磨具工程|从包裹体氧氮质量分数看我国金刚石质的飞跃及提高品质的方向

从包裹体氧氮质量分数看我国金刚石质的飞跃及提高品质的方向

沈翔 徐燕军 尹翔 柳成渊 刘一波 罗锡裕

金刚石与磨料磨具工程2012,Vol.32Issue(6):34-37,4.
金刚石与磨料磨具工程2012,Vol.32Issue(6):34-37,4.

从包裹体氧氮质量分数看我国金刚石质的飞跃及提高品质的方向

A qualitative leap of China-made diamond and its improvement from the inclusion and oxygen-nitrogen mass fraction aspect

沈翔 1徐燕军 2尹翔 1柳成渊 2刘一波 1罗锡裕2

作者信息

  • 1. 中国钢研科技集团有限公司,北京100081
  • 2. 安泰科技股份有限公司,北京100081
  • 折叠

摘要

Abstract

The shape, size and characteristics of inclusions in synthetic diamonds were revealed. The composition and mass fraction of the inclusions was analyzed by inductively coupled plasma atomic emission spectrometry (ICP-AES) , while mass fractions of the oxygen and nitrogen in diamond were analyzed by oxygen-nitrogen analyzer. It is specified that in China-made diamond mass fraction of inclusion decreased by an order of magnitude in the last decade, which is 0. 015% ~0. 037% , as compared to 0. 01% , the foreign high-grade diamond mass fraction of inclusion. The thermal toughness index ( TTI) of diamonds were also tested. The results indicated that TTI was significantly related to mass fraction of inclusion and oxygen. The TTI value of China-made diamond is closely similar to that of the foreign high-grade diamond. With the inherent defects of the diamond as a criterion, China diamond industry has already achieved a qualitative leap, even though it still lags behind the advanced foreign level. The improvement direction was stated in the end.

关键词

人造金刚石/包裹体/热冲击指数

Key words

synthetic diamond/inclusion/thermal toughness index

分类

矿业与冶金

引用本文复制引用

沈翔,徐燕军,尹翔,柳成渊,刘一波,罗锡裕..从包裹体氧氮质量分数看我国金刚石质的飞跃及提高品质的方向[J].金刚石与磨料磨具工程,2012,32(6):34-37,4.

金刚石与磨料磨具工程

OACSTPCD

1006-852X

访问量0
|
下载量0
段落导航相关论文