江苏大学学报（自然科学版）2012，Vol.33Issue(6)：638-642,5.DOI:10.3969/j.issn.1671-7775.2012.06.004
基于有限元的发动机受热零件温度场分析
Temperature field analysis of engine heated parts based on finite element method
摘要
Abstract
To solve the problem of thermal load increasing of 490 diesel engine due to the combustion chamber change from spherical shape to co-shape, the temperature field of three heated cylinder parts was analyzed based on finite element method. By Visual Basic, the instantaneous gas temperature and the heat transfer coefficient in cylinder were calculated as boundary conditions of finite element analysis. The finite element models of piston, cylinder head fire-face board and cylinder liner were established by UG and imported into ANSYS to obtain grid division. The temperature field of the heated parts was calculated by ANSYS. The results show that the maximum temperature distribution of piston lies at the throat mouth edge of combustion chamber. The piston temperature decreases from the top to the bottom. The first ring groove temperature is higher than normal value, so the cooling method or heat insulation should be used. The maximum temperature of the fire-face board appears at the region between intake valve and exhaust valve which is difficult to be cooled with marked effect by burning gas. The temperature of cylinder liner decreases from the top to the bottom.关键词
温度场/发动机/有限元/活塞/缸盖/缸套Key words
temperature field/engine/finite element/piston/cylinder head/cylinder liner分类
能源科技引用本文复制引用
吴怡,唐岚..基于有限元的发动机受热零件温度场分析[J].江苏大学学报（自然科学版）,2012,33(6):638-642,5.基金项目
四川省教育厅高校科研创新团队项目(KYTD201003) （KYTD201003）
四川省重点学科建设项目(SZD0410) （SZD0410）
