棉纺织技术2013，Vol.41Issue(2)：39-41,3.
不锈钢纤维混纺纱纺纱工艺优化
Processing Optimization of Stainless Steel Fiber Blended Yarn
摘要
Abstract
Blending spinning processing of stainless steel fiber and retardant viscose fiber was discussed. According to stainless steel fiber property,composite blending was adopted. Ten kinds of 48.6 tex stainless steel fiber blended yarn can be spun successfully, stainless steel fiber content is from 5% to 50%. The yam quality was tested. The result shows that as stainless steel fiber content increases, trend of yarn hairiness is reduced basically, yarn strength is changed slightly,volatility of wear resistance is larger for yarn unevenness. It is considered that better sliver quality can be ensured when doubling is more than 3 times for stainless steel fiber and retardant viscose fiber blended yarn. Infrared automatic stop device should be adopted by drawing frame. As the content of stainless steel fiber increases, some parameter should be adjusted accordingly, such as rubber-covered roller hardness in drawing, roving twist factor, draft multiple in spinning back area and ring traveler types.关键词
不锈钢纤维/阻燃粘胶纤维/混和/毛羽/强力/耐磨性Key words
Stainless Steel Fiber/Retardant Viscose Fiber/Blending/Hairiness/Strength/Wear Resistance分类
轻工纺织引用本文复制引用
董建毫,李瑞洲..不锈钢纤维混纺纱纺纱工艺优化[J].棉纺织技术,2013,41(2):39-41,3.
