农业机械学报2012，Vol.43Issue(z1)：106-111,6.DOI:10.6041/j.issn.1000-1298.2012.S0.021
基于ADAMS的玉米植株收获过程仿真
Simulation on Corn Plants in Harvesting Process Based on ADAMS
摘要
Abstract
The models of stripper rollers of a certain type of corn harvester and corn plants were established in Pro/E. And then, these models were led to the ADAMS environment with the interface of MECHANISM/ Pro to create the virtual prototyping models including constrains and motions. The harvesting process was simulated based on the ADAMS techniques of sensor and manuscript control. The simulation data analysis was mainly focused on the case that the corn plants at the angle of 79°. Finally, the best inclination angle of plant, 89°, was derived based on the analysis of harvest time and grain hurt rate.关键词
玉米植株/立式摘穗辊/虚拟样机模型/收获过程/ADAMSKey words
Corn plants/ Vertical roller/ Virtual prototyping models/ Harvesting process/ ADAMS分类
农业科技引用本文复制引用
杜岳峰,毛恩荣,宋正河,朱忠祥,高建民..基于ADAMS的玉米植株收获过程仿真[J].农业机械学报,2012,43(z1):106-111,6.基金项目
公益性行业(农业)科研专项经费资助项目(200903050-5)和"十二五"国家科技支撑计划资助项目(2011BAD20B01) （农业）
