中国机械工程Issue(18)：2243-2248,6.DOI:10.3969/j.issn.1004-132X.2012.18.021
0Cr18Ni9不锈钢本构模型及其对切削力预测影响分析
Constitutive Model of Stainless Steel 0Cr18Ni9 and Its Influence on Cutting Force Prediction
摘要
Abstract
The static and dynamic mechanical properties of stainless steel 0Crl8Ni9, with solution heat treatment under temperature 1100C, were analyzed herein, through experiments with material testing system(MTS) and split Hopkinson pressure bar(SHPB) apparatus. On the basis of the above work,the constitutive relations of the material were built using Johnson - Cook constitutive model. In addition,the material parameters of the model were observed by using the orthogonal experimental design. The two sets of the material parameters obtained from SHPB and cutting test were applied to predict cutting force under various machining conditions, and their applicability was compared. The comparison results provide the reference for the analysis model in stainless steel cutting research as well as the selection of material flow stress model during numerical computation.关键词
0Cr18Ni9不锈钢/Johnson—Cook/本构关系/切削力预测Key words
0Crl8Ni9 stainless steel/Johnson-Cook/constitutive model/cutting force prediction分类
矿业与冶金引用本文复制引用
凌玲,李星星,王学林,胡于进..0Cr18Ni9不锈钢本构模型及其对切削力预测影响分析[J].中国机械工程,2012,(18):2243-2248,6.基金项目
国家重点基础研究发展计划(973计划)资助项目(2009CB724306) （973计划）
