给定预紧力下组合机架的上限载荷计算OA北大核心CSCDCSTPCD
Calculation of Upper Iimit Load for Assembled Frame Hydraulic Press under Given Pre-tightened Force
针对传统预紧组合结构机架预紧力计算模型的不足,以承载下立柱上端内侧角点处的压应力等于零为临界开缝判据,在给定预紧力下,建立综合考虑弯曲和拉压变形的液压机上限载荷的计算模型,结合平衡和变形协调条件,推导出了典型预紧组合结构液压机承受中心载荷时上限载荷的计算公式,并以某厂的120MN大型自由锻造液压机本体为原型,设计并制备了1:15的金属模型压机,利用该模型压机对所提出的计算模型进行了实验验证.实验结果表明,该计算模型是准确可靠的,较传统理论的计算精度有大幅提高.
Aiming at the defects of traditional calculation model of the pre-tightened assembled structure,a critical criterion was proposed that the stress of inside corner at the top of upright column was equal to zero. Then a calculation model considering bending, tension and compression deformation was established under the given pre-tightened force. Combining with the force balance and deformation coordination conditions,the formula of upper limit load was derived…查看全部>>
金淼;董晓传;邹宗园;孙建新
燕山大学先进锻压成形技术与科学教育部重点实验室,秦皇岛,066004燕山大学先进锻压成形技术与科学教育部重点实验室,秦皇岛,066004燕山大学先进锻压成形技术与科学教育部重点实验室,秦皇岛,066004山东通裕集团有限公司,德州,251200
矿业与冶金
液压机组合结构整体性上限载荷预紧力
hydraulic press assembled structure integration property upper limit load pre - tightened force
《中国机械工程》 2012 (20)
全预紧组合结构液压机的整体性理论研究
2476-2480,5
国家自然科学基金资助项目(50975248)国家科技重大专项(2010ZX04017-013)
评论