焊管2013，Vol.36Issue(2)：53-57,5.
标准中关于拔制三通开孔补强计算方法的对比
The Comparision on Opening Reinforcement Calculation Method of the Extruded Tee in the Different Standards
王高峰 1杨延华 2刘迎来 3李云龙 1李记科 2高建忠 1杨专钊 2吴金辉1
作者信息
- 1. 中国石油集团石油管工程技术研究院,西安710065
- 2. 北京隆盛泰科石油管科技有限公司,北京100101
- 3. 西安航空学院机械工程系,西安710077
- 折叠
摘要
Abstract
The standards for designing extruded tee used for transporting oil and gas in China domestic main include; GB/T 50251-2003 Code for Design of Gas Transmission Pipeline Engineering, GB/T 50253-2003 Code for Design for Oil Transportation Pipeline Engineering, SY/T 0510-2010 Steel Butt-welding Pipe Fitting, and ASME B 31.3-2010 Process Piping,but the methods of design calculation in each standard have slight difference. In this article, it contrasted the calculation method in the above 4 mentioned standards, pointed out the similarities and differences. And the calculation results were compared through practice example, it can provide reference for engineering design and check calculation.关键词
拔制三通/等面积补强/标准Key words
extruded tee/ equal area reinforcement/ standard分类
矿业与冶金引用本文复制引用
王高峰,杨延华,刘迎来,李云龙,李记科,高建忠,杨专钊,吴金辉..标准中关于拔制三通开孔补强计算方法的对比[J].焊管,2013,36(2):53-57,5.
