环境工程学报2013，Vol.7Issue(3)：879-882,4.
光-Fenton法处理电镀添加剂生产废水
Treatment of electroplating additive producing wastewater by UV-Fenton
摘要
Abstract
In this study, UV-Fenton was used to treat electroplating additive producing wastewater and the impacts of H2O2 dosage, FeSO4 · 7H2O dosage, pH, oxalic acid dosage,TiO2 on the COD removal ratio were studied. The results showed that the COD removal rate of UV-Fenton was 94. 3% and the best operating condition were pH =4, H2O2 dosage of 80 mL/L, FeSO4 · 7H2O dosage of 6 g/L, n( Fe2 + ) : n( H2O2 ) =1:36, oxalic acid dosage of 12 g/L, TiO2 dosage of 1. 0 g/L and the reaction time of 60 minutes.关键词
废水/电镀添加剂生产/COD/UV-FentonKey words
wastewater/ electroplating additive production/ COD/ UV-Fenton分类
资源环境引用本文复制引用
杨益,刘国光,吕文英,姚琨..光-Fenton法处理电镀添加剂生产废水[J].环境工程学报,2013,7(3):879-882,4.基金项目
国家自然科学基金资助项目(2009ZX07211-005-03) （2009ZX07211-005-03）
