强激光与粒子束2013，Vol.25Issue(5)：1303-1306,4.DOI:10.3788/HPLPB20132505.1303
多间隙气体开关触发放电过程及击穿抖动
Discharge process and closure jitter of six-stage gas switch under pulsed trigger
摘要
Abstract
Closure jitter versus voltage ratio and trigger voltage was experimentally measured for a six-stage gas switch. An ultra-violet fiber system was used to diagnose the discharge process influencing the closure jitter, and a pre-ionizing measure was employed to decrease the trigger voltage. It is found that the switch closure jitter declines exponentially with the product of trigger voltage and voltage ratio. The trigger gap accounts for 30%-40% of the closure jitter while the other five gaps account for 60%-70%. The trigger voltage and voltage ratio have more influences on the jitter of the trigger gap which breaks down first, than on that of the three gaps discharging subsequently, and hardly affects the last two gaps. For the switch with a voltage ratio greater than 57%, the pre-ionizing measure finally lowers the trigger voltage by over 10 kV.关键词
气体开关/欠压比/闭合抖动/触发电压/光纤探测器Key words
gas switches/voltage ratio/closure jitter/trigger voltage/fiber detector分类
信息技术与安全科学引用本文复制引用
丛培天,邱爱慈,孙铁平,盛亮,李阳,张美..多间隙气体开关触发放电过程及击穿抖动[J].强激光与粒子束,2013,25(5):1303-1306,4.基金项目
国家自然科学基金项目(50637010,11135007) （50637010,11135007）
