铸造技术2013，Vol.34Issue(1)：95-97,3.
基于ProCAST的转K6型摇枕铸造工艺优化
Optimization on Casting Process for K6 Swing Bolster Based on ProCAST
摘要
Abstract
Combined with practice, the filling flow field and casting analysis the solidification temperature field of B+level swing bolster were simulated with software ProCAST, the tendency to shrinkage, shrinkage and cracks appearing and their position were predicted. On this basis, the reasons causing the casting defects of shrinkage cavity and shrinkage in actual casting process were analyzed, and the casting process for the swing bolster castings was optimized according to the simulation results.关键词
ProCAST/摇枕/铸造工艺Key words
ProCAST/ swing bolster/ casting process分类
矿业与冶金引用本文复制引用
潘安霞,赵茹叶..基于ProCAST的转K6型摇枕铸造工艺优化[J].铸造技术,2013,34(1):95-97,3.基金项目
常州科教城院校科研基金项目(编号:K2011208) （编号:K2011208）
江苏省"青蓝工程"资助项目(苏教师[2010]27号). （苏教师[2010]27号）
