电源技术2013，Vol.37Issue(6)：973-975,3.
添加氟化碳的二氧化锰正极制备工艺
Process for preparing cathode MnO2 with additive CFx
陈笛 1王兴贺 1孟宪玲 1陈雪梅1
作者信息
- 1. 中国电子科技集团公司第十八研究所,天津300384
- 折叠
摘要
Abstract
carbon fluoride (CFx) was added into the manganese dioxide to improve specific capacity.The structure of CFx was characterized by XRD and FTIR,and SEM was used to investigate the morphology of various samples.Constant current discharge was employed to study the electrochemical performance of different cathodes prepared with different processes.The discharge results show that the specific capacity is enhanced from 220 mAh/g of MnO2 to 284 mAh/g of MnO2/CFx3,which increased about 29％.The results also show that there are obvious differences among these three preparation processes,and the specific capacity of the cathode under optimal process can increase 13％ at most.关键词
锂一次电池/氟化碳/制备工艺/比容量Key words
primary lithium battery/ carbon fluoride/ preparation process/ specific capacity分类
信息技术与安全科学引用本文复制引用
陈笛,王兴贺,孟宪玲,陈雪梅..添加氟化碳的二氧化锰正极制备工艺[J].电源技术,2013,37(6):973-975,3.
