现代制造工程Issue(5)：69-72,4.
Pro/E和ADAMS环境下回柱绞车虚拟样机建模及动力学分析
Virtual prototype modeling and dynamic analysis of drawing hoist based on Pro/E and ADAMS
王凯 1李炳文 1朱学凯 1任锐1
作者信息
- 1. 中国矿业大学机电工程学院,徐州221008
- 折叠
摘要
Abstract
Introduced the drive principle of drawing hoist at first,then established the whole hoist model with PRO/E,imported the model to ADAMS with the use of general format parasolid file.Built the constraint and load,the virtual prototype model was formed.Got the time domain and frequency range chart of the all levels gear meshing force and the rotate speed of every transmission parts from the simulation.Through the comparison with the theoretical value,the accuracy and practicability of the virtual prototype was verified,and the factor of error caused was analyzed,could provide reliable basis for the deeply analysis and research.关键词
回柱绞车/Pro/E软件/虚拟样机/ADAMS软件Key words
drawing hoist/ Pro/E/ virtual prototype / ADAMS分类
机械制造引用本文复制引用
王凯,李炳文,朱学凯,任锐..Pro/E和ADAMS环境下回柱绞车虚拟样机建模及动力学分析[J].现代制造工程,2013,(5):69-72,4.
