现代制造工程Issue(6)：105-110,6.
高速渐开线斜齿圆柱齿轮齿廓修形技术研究
Research on tooth profile modification of involute helical gear with high speed
孔贤 1康敏 1费秀国 2柳伟2
作者信息
- 1. 南京农业大学工学院/江苏省智能化农业装备重点实验室,南京210031
- 2. 南京创力传动机械有限公司,南京211122
- 折叠
摘要
Abstract
The involute helical gear with high speed meshed in high frequency and transmitted high-power.In order to make the high-speed gear box work in reposeful mode and reduce the engaging-in/out attack because of the load and aberration during manufacturing or install operation.Besides,for the purpose of the low noise and favourable lubrication,the tooth profile modification appeared important.Constructed model by Pro/E,then leaded it in ANSYS-Workbench to simulate by the interface routine,so it could get the parameter for tooth profile modification.Confirmed by ANSYS-Workbench,after tooth profile modification,the peak value of von-mises stress raised slightly,but the contact stress had been reduced sharply,furthermore,the interference disappeared,thus it could improve the performance of gear effectively.关键词
高速渐开线斜齿圆柱齿轮/齿廓修形/Pro/E软件/ANSYS-Workbench软件Key words
involute helical gear with high speed/ tooth profile modification/ Pro/E/ ANSYS-Workbench分类
机械制造引用本文复制引用
孔贤,康敏,费秀国,柳伟..高速渐开线斜齿圆柱齿轮齿廓修形技术研究[J].现代制造工程,2013,(6):105-110,6.
