棉纺织技术2013，Vol.41Issue(7)：40-43,4.
并条胶辊性能的技术改进
Technology Progress of Drawing Rubber-covered Roll Property
魏玉堂 1王新虎 1周先景 2赵大同 3陈晓红3
作者信息
- 1. 陕西宝鸡和立机械制造有限公司
- 2. 山东科技职业学院
- 3. 江苏纺织工业设计研究院有限公司
- 折叠
摘要
Abstract
Technology modification measures and methods of high speed drawing frame rubber covered roll were discussed.Some technology modifications were carried out according to existed problems in traditional rubber-covered roll manufacture processing.Bearing assembly of self-lubricating drafting rubber-covered roll was developed.Demands of higher speed,larger load and longer time can be reached.Injection molding new technology is used and traditional molded commissure marks is eliminated,hardness of rubber-covered roll is even,mechanical wave of 5 cm ～ 6 cm can be eliminated.Carboxylated modification is done on rubber-covered roll,ionic bond network is used,surface resistance of rubber-covered roll can be reduced,the antistatic property can be improved.New environmentally friendly material is adopted to reduce harmful air pollution and harm.It is considered that property of rubber-covered roll can be improved greatly by adopting the above technology methods,use demands of high speed drawing frame can be reached well.关键词
自润滑轴承/注压成形/离子键网络/光面轴/环保Key words
Self-lubricating Bearing/ Injection Molding/ Ionic Bond Network/ Smooth Axis/ Environmental Protection分类
轻工纺织引用本文复制引用
魏玉堂,王新虎,周先景,赵大同,陈晓红..并条胶辊性能的技术改进[J].棉纺织技术,2013,41(7):40-43,4.
