塑料科技2013，Vol.41Issue(7)：90-93,4.
热水器电池盒注塑模设计
Design of Injection Mould for Battery Box of Water Heater
陈进泽 1齐国红 1董文正 2林启权2
作者信息
- 1. 三一重工股份有限公司,湖南长沙410010
- 2. 湘潭大学机械工程学院,湖南湘潭411105
- 折叠
摘要
Abstract
The molding process for battery box of water heater was analyzed,and the whole design process and key points of the plastics molding were introduced.The design of injection system,the structure of molding parts,the slider of inside stripping and the determination of extrusion device were analyzed.The results show that the design achieves smooth molding and ejection of the parts,and solves the difficult problem of inner side core-pulling brought by the existence of concave.关键词
电池盒/浇注系统/内侧抽芯/注塑模Key words
Battery box/ Injection system/ Inner side core-pulling/ Injection mould分类
化学化工引用本文复制引用
陈进泽,齐国红,董文正,林启权..热水器电池盒注塑模设计[J].塑料科技,2013,41(7):90-93,4.
