中国钼业2013，Vol.37Issue(3)：24-27,4.
焙烧钼精矿块新生产线压制工艺参数优化与研究
STUDY ON THE PARAMETER OPTIMIZATION OF THE NEW PRODUCTION LINE FOR PRESSING ROASTED MOLYBDENUM CONCENTRATE BLOCK
沈明科 1尹孝刚 1乌红绪 1康向文1
作者信息
- 1. 金堆城钼业股份有限公司,陕西华县714101
- 折叠
摘要
Abstract
Compared to molybdenum-iron,pressing roasted molybdenum concentrate into block has the following advantages:less consumption of excipients,low cost,energy saving,and environmental protection.With the technology developing of making steel from pressing molybdenum concentrate block,less and less domestic factories will make steel from molybdenum-iron.The technology of making steel from pressing molybdenum concentrate block has a wild prospect in future.In this paper,the experimental conditions were investigated,such as ingredients concentration,ingredients dosage,drying time and material particles,and the optimal conditions were obtained.On the same time,the results indicate in the optimal conditions the balling rate and quality of the product were increased and the economic efficiency was increased obviously.关键词
焙烧钼精矿块/添加剂/生产工艺Key words
roasted molybdenum concentrate block / additives / production technology分类
矿业与冶金引用本文复制引用
沈明科,尹孝刚,乌红绪,康向文..焙烧钼精矿块新生产线压制工艺参数优化与研究[J].中国钼业,2013,37(3):24-27,4.
