| 注册
首页|期刊导航|材料工程|SiC含量对环氧/SiC复合材料冲蚀磨损性能的影响

SiC含量对环氧/SiC复合材料冲蚀磨损性能的影响

邢志国 周新远 吕振林 周永欣

材料工程Issue(6):67-71,5.
材料工程Issue(6):67-71,5.DOI:10.3969/j.issn.1001-4381.2013.06.014

SiC含量对环氧/SiC复合材料冲蚀磨损性能的影响

Effect of SiC Content on the Erosion and Wear Resistance of Epoxy/SiC Composite

邢志国 1周新远 1吕振林 2周永欣2

作者信息

  • 1. 装甲兵工程学院再制造技术国防科技重点实验室,北京100072
  • 2. 西安理工大学材料科学与工程学院,西安710048
  • 折叠

摘要

Abstract

In order to improve the erosion and wear resistance of large flow parts in factories and mines,the epoxy/SiC composite coating was prepared using SiC particle and epoxy resin.The composite coating with excellent erosion and wear resistance can be solidified quickly and coated conveniently.The article studied the effect of SiC particle content on the erosion and wear resistance of epoxy/SiC composite.The erosion and wear test was carried out on a self-made erosion and wear tester.The erosion and wear morphologies of the composite were observed using SEM.The results showed that different SiC particle content in the composite could change the erosion and wear resistance.When the mass fraction of SiC was 66.66%,the interaction of "shadow effect" and "bonding effect"between the SiC particles and resin achieved the best.Meanwhile,the erosion and wear resistance of the composite was the best.When the content of SiC was optimal,the erosion and wear resistance of the composite was better than that of the white cast iron under the same erosion angle.

关键词

复合材料/冲蚀磨损/环氧树脂/SiC颗粒

Key words

composite/ erosion and wear/ epoxy resin/ SiC particle

分类

通用工业技术

引用本文复制引用

邢志国,周新远,吕振林,周永欣..SiC含量对环氧/SiC复合材料冲蚀磨损性能的影响[J].材料工程,2013,(6):67-71,5.

基金项目

国家973计划(2011CB134003) (2011CB134003)

材料工程

OA北大核心CSCDCSTPCD

1001-4381

访问量0
|
下载量0
段落导航相关论文