| 注册
首页|期刊导航|无机材料学报|聚合物浸渍裂解法制备C/C-ZrC-SiC-ZrB2复合材料及其性能研究

聚合物浸渍裂解法制备C/C-ZrC-SiC-ZrB2复合材料及其性能研究

解静 李克智 付前刚 李贺军 姚西媛

无机材料学报2013,Vol.28Issue(6):605-610,6.
无机材料学报2013,Vol.28Issue(6):605-610,6.DOI:10.3724/SP.J.1077.2013.12450

聚合物浸渍裂解法制备C/C-ZrC-SiC-ZrB2复合材料及其性能研究

Preparation and Properties of C/C-ZrC-SiC-ZrB2 Composites via Polymer Infiltration and Pyrolysis

解静 1李克智 1付前刚 1李贺军 1姚西媛1

作者信息

  • 1. 西北工业大学凝固技术国家重点实验室,炭/炭复合材料工程技术研究中心,西安 710072
  • 折叠

摘要

Abstract

C/C-ZrC-SiC-ZrB2 composites were prepared by precursor infiltration and pyrolysis (PIP) process using a mixture solution of organic ZrC,ZrB2 precursor and polycarbosilane as precursor.Microstructure,flexural property and ablation behavior of the composites were studied.The results show that the composites produced by PIP have a homogeneity distribution of ceramic phase.The flexural strength of the composites is 126.31 MPa.There are a large number of carbon fiber bundles pulled-out,and the composites exhibit a pseudo-plastic fracture behavior.After ablated for 120 s by oxyacetylene flame,the composites show no significant ablation,and their linear and mass ablation rates are-2.50×10-4 mm/s and-1.33×10-4 g/s,respectively.Different kinds of protective coatings form on the different regions of ablated surface,which can not only reduce the diffusion of oxygen and heat but also remedy defects effectively,and thereby greatly improves the ablation resistance of the composites.

关键词

聚合物浸渍裂解法/C/C-ZrC-SiC-ZrB2复合材料/力学性能/烧蚀

Key words

polymer infiltration and pyrolysis/ C/C-ZrC-SiC-ZrB2 composites/ mechanical property/ ablation

分类

通用工业技术

引用本文复制引用

解静,李克智,付前刚,李贺军,姚西媛..聚合物浸渍裂解法制备C/C-ZrC-SiC-ZrB2复合材料及其性能研究[J].无机材料学报,2013,28(6):605-610,6.

基金项目

国家自然科学基金(910160029 ()

50902111) ()

National Natural Science Foundation of China (910160029,50902111) (910160029,50902111)

无机材料学报

OA北大核心CSCDCSTPCDSCI

1000-324X

访问量0
|
下载量0
段落导航相关论文