电焊机2013，Vol.43Issue(7)：103-106,4.DOI:10.7512/j.issn.1001-2303.2013.07.25
Q235B钢薄板RSW焊接接头金相组织分析
Analysis on metallographic of Q235B steel sheet welded joints by RSW
谢芋江 1周培山 1杨祥海 1景勇俊1
作者信息
- 1. 西南石油大学应用技术学院,四川南充637001
- 折叠
摘要
Abstract
The welding of Q235B steel (δ=1mm) is tested with RSW process,research and analysis of various parts of microstructure changes and hardness distribution characteristics of the good quality of welded joints.The results showed that the welded joints normalizing zone are the small granular ferrite and pearlite,the hardness value slightly higher than the base material,good plasticity and toughness; overheated zone is mainly made up of pearlite and a small amount of feathery upper bainite with the highest hardness;the hardness value of the nugget zone,which includes lath martensite and retained austenite,is slightly lower than the overheated zone.关键词
Q235B/RSW/焊接接头/金相组织Key words
Q235B/ RSW/ welded joint/ metallurgical structures分类
矿业与冶金引用本文复制引用
谢芋江,周培山,杨祥海,景勇俊..Q235B钢薄板RSW焊接接头金相组织分析[J].电焊机,2013,43(7):103-106,4.
