玻璃钢/复合材料Issue(5)：45-50,6.
热隔膜工艺温度与成型速率对C形复合材料成型质量的影响
EFFECTS OF TEMPERATURE AND MOLDING RATE IN HOT DIAPHRAGM FORMING PROCESS ON THE FORMING QUALITY OF C-SHAPED COMPOSITE
摘要
Abstract
In this study,the effects of processing temperature and molding rate on the forming quality of Cshaped carbon fiber/epoxy resin prepreg stack during hot diaphragm forming process were investigated.C-shaped prepreg preforms were produced using a home-made hot diaphragm forming equipment.The thickness variations of the preforms and the manufacturing defects after diaphragm forming process were evaluated.Furthermore,interlaminar friction behavior of the prepreg stack was experimentally analyzed for showing the importance of the processing parameters.The results show that the C-shaped prepreg preforms with good forming quality can be achieved through increasing processing temperature and reducing vacuum applying rate,which obviously promote prepreg interlaminar slipping process.The process temperature and molding rate in hot diaphragm forming process strongly influence prepreg interply frictional force,and the interlaminar frictional force can be taken as a key parameter for processing parameter optimization.关键词
热固性复合材料/热隔膜成型工艺/C形结构/预浸料Key words
thermosetting composite / hot diaphragm forming process / C-shaped / prepreg分类
通用工业技术引用本文复制引用
边旭霞,顾轶卓,孙晶,李敏,张冬梅,张佐光..热隔膜工艺温度与成型速率对C形复合材料成型质量的影响[J].玻璃钢/复合材料,2013,(5):45-50,6.基金项目
国家商用飞机制造工程技术研究中心创新基金(SAMC12-JS-15-010) （SAMC12-JS-15-010）
