宇航材料工艺2013，Vol.43Issue(3)：81-83,3.
焊接方式对铝合金搅拌摩擦焊T型接头性能的影响
Effects of Welding Ways on Properity of Aluminum Alloy T-Joint During Friction Stir Welding
范开春 1郭辉荣 1李宝华 2唐众民2
作者信息
- 1. 中国航天三江集团设计所 武汉 430040
- 2. 中国航天三江集团红阳公司,孝感 432100
- 折叠
摘要
Abstract
Friction stir welding for T-joint of 2A70-T6 aluminum alloy is carried out by using four different kind of welding tools,the weld cross section is observed and the tensile strength of weld is tested.The results show that the transition metal at the advancing side deform excessively compared to the retreating side.The joints often break at the advancing side,under the same welding parameter.The nugget width and the tensile strength increase along with the diameter of the pin increases in the single-passs weld,but the increment is small.The tensile strength of parallel weld is about 93 ％ of the single-pass weld.In order to get the same width nugget,it is advantage to adopt single-pass welding by using big diameter pin over parallel welding.关键词
搅拌摩擦焊/T型接头/单道焊/焊核Key words
Friction stir welding/ T-joint / Single-pass weld / Nugget引用本文复制引用
范开春,郭辉荣,李宝华,唐众民..焊接方式对铝合金搅拌摩擦焊T型接头性能的影响[J].宇航材料工艺,2013,43(3):81-83,3.
