| 注册
首页|期刊导航|强激光与粒子束|爆磁压缩发生器模拟装置的设计与仿真

爆磁压缩发生器模拟装置的设计与仿真

吴新贺 陈冬群 王俞卫 李达 苏曲 吕彦奎 刘车波

强激光与粒子束2013,Vol.25Issue(9):2457-2460,4.
强激光与粒子束2013,Vol.25Issue(9):2457-2460,4.DOI:10.3788/HPLPB20132509.2457

爆磁压缩发生器模拟装置的设计与仿真

Design and analysis for simulation device of flux compression generator

吴新贺 1陈冬群 1王俞卫 1李达 1苏曲 1吕彦奎 1刘车波1

作者信息

  • 1. 国防科学技术大学光电科学与工程学院,长沙410073
  • 折叠

摘要

Abstract

Some groups of parameters for simulation device of flux compression generator(FCG) were optimized by Pspice.The comparability of the current output property curve of the simulation device and FCG with different groups of parameters were respectively analyzed with the gray relation grade analysis method.An appropriate group of parameters was confirmed at last.The simulated result proved the feasibility of the project for simulation device of FCG.

关键词

爆磁压缩发生器/模拟装置/高压脉冲电容器/多电感放电回路/灰色关联度/曲线相似度

Key words

flux compression generator/ simulation device of flux compression generator/ high voltage pulse capacitance/ many inductance discharge loop/ gray relation grade/ curve comparability

分类

信息技术与安全科学

引用本文复制引用

吴新贺,陈冬群,王俞卫,李达,苏曲,吕彦奎,刘车波..爆磁压缩发生器模拟装置的设计与仿真[J].强激光与粒子束,2013,25(9):2457-2460,4.

基金项目

国家高技术发展计划项目 ()

强激光与粒子束

OA北大核心CSCDCSTPCD

1001-4322

访问量0
|
下载量0
段落导航相关论文