机械制造与自动化2013，Vol.42Issue(4)：61-64,4.
转向器阀套内孔珩磨与铰珩工艺对比研究
Comparison Between Honing and Reaming Honing in Machining Steering Valve Sleeve
杨筱蓉 1朱永伟 2朱振峰 1徐正选1
作者信息
- 1. 南京航空航天大学机电学院,江苏南京210016
- 2. 豫北转向系统股份有限公司,河南新乡453003
- 折叠
摘要
Abstract
In this paper,the traditional honing is compared with the reaming homing from machining principle,processing parameters and machining results of the steering valve sleeve.Results show that:compared with traditional honing,reaming honing is characteristic of simple motion,high efficiency.perfect durability and rigdity,low cost and stable quality.This is the ixeal process for the batch process of the inner holes.关键词
转向器/阀套/珩磨/铰珩/工艺对比Key words
deflector /valve sleeve/ honing/ reaming honing/ compare分类
机械制造引用本文复制引用
杨筱蓉,朱永伟,朱振峰,徐正选..转向器阀套内孔珩磨与铰珩工艺对比研究[J].机械制造与自动化,2013,42(4):61-64,4.
