现代地质2013，Vol.27Issue(3)：662-668,7.
多种建模方法耦合建立冲积扇三维构型模型:以克拉玛依油田六中东区下克拉玛依组为例
Combining Several Modeling Methods to Build 3D Architecture Model of Alluvial Fan: A Case Study on Lower Karamay Formation,Liuzhong Dong Area, Karamay Oilfield
摘要
Abstract
This paper is a case study on the Lower Karamay Formation.By analyzing eight sealed coring wells with small distance and the architecture characteristics of twenty-four wells around,a 3D architecture model of target formation of the study area is built.Different architecture modeling methods practical to fans with different subfacies were derived.Fan head is extensive connecting body mainly composed of sheet-flow sandstone bodies,and the distribution areas of the architecture of different levels are small,so Object-based modeling method is used.The main architecture units of mid-fan are fine sheet-flow grains,braided channel and sheet-flow sandstone body.The braided channel and sheet-flow sandstone bodies have obvious contact belt.So Truncate Gauss Simulation method is used.The main architecture unit of the fan-margin is fine sheet-flow grains,as well as a small number of through-flow and sheet-flow sandstone bodies,so Sequence Indicator Simulation and Object-based modeling method are applicable.The 3D architecture model built can well embody the distribution areas and the contact relations of the architecture units of different levels in both horizontal and vertical directions,which can provide an evidence for the remaining oil prediction,as well as well-pattern adjustment and remaining oil tapping.关键词
冲积扇/构型建模/截断高斯模拟/基于目标的模拟/序贯指示模拟Key words
alluvial fan / architecture modeling/ Truncate Gauss Simulation / Object-based modeling / Sequence Indicator simulation分类
能源科技引用本文复制引用
李君,李少华,张敏,许长福,吴小军..多种建模方法耦合建立冲积扇三维构型模型:以克拉玛依油田六中东区下克拉玛依组为例[J].现代地质,2013,27(3):662-668,7.基金项目
国家科技重大专项(2011ZX05011-001) （2011ZX05011-001）
国家自然科学基金项目(41272136). （41272136）
