机械制造与自动化Issue(2)：189-191,3.
基于FPGA的开放式数控系统硬件配置设计
Design of Hardware-reconfigurability Based on FPGA for Open CNC System
黄昕龙 1倪霞林1
作者信息
- 1. 福州大学 机械工程及自动化学院，福建 福州350108
- 折叠
摘要
Abstract
According to the reconfigurable requirement of open CNC system. this paper sums up and analyzes the feasibility of the hardware-reconfigurability based on the architecture of PC+ programmable I/O board. Meanwhile, the modular design based on FPGA is used to estabish its module. According to hardware description language, the main modules are designed.The open CNC system is verified through the simulation software and its application.This system meets the requirement of the hardware reconfigu-rability.关键词
开放式数控系统/FPGA/硬件可配置Key words
open CNC system/FPGA/hardware-reconfigurability分类
机械制造引用本文复制引用
黄昕龙,倪霞林..基于FPGA的开放式数控系统硬件配置设计[J].机械制造与自动化,2014,(2):189-191,3.
