石油钻采工艺Issue(5)：132-136,5.
玉北地区深部地层扭力冲击器提速工艺
Research on the torsion impact generator for speeding up drilling in deep formation of Yubei area
摘要
Abstract
Due to the great burying depth, larger than 4000m, and hard Shajingzi formation with strong abrasiveness and poor drill-ability in Yubei area of Xinjiang Province, it is hard to speed up drilling operation, Previous practice shows that the cone bits have a poor impact on the Shajingzi formation and the conventional PDC bit has high anti-torque, so it is easy to produce“stick-slip”phenomenon. Finally, the rock breaking is inefifcient. In order to improve the penetration rate and reduce the cost, TorkBuster torsion impact generator with a personalized PDC bit is recommended. The three drilling technologies,"PDC bit+screw drill tool","diamond bit+turbine tool"and"torsion impact generator+PDC bit”, are discussed in the paper. The results show that torsion impact generator is more effective than other drilling technologies, with the average rate up to 6.42m/h, 200%-300%higher than earlier stage. The torsion impact generator overcomes the deep drilling problems in the high-strength plastic formations. It should be widely applied.关键词
深井提速/扭力冲击器/PDC钻头/钻井参数/现场试验Key words
deep well drilling speed improvement/torsion impact generator/PDC bit/drilling parameter/ifeld testing分类
能源科技引用本文复制引用
侯子旭,贾晓斌,李双贵,邓文良,曾德智..玉北地区深部地层扭力冲击器提速工艺[J].石油钻采工艺,2013,(5):132-136,5.基金项目
国家自然科学基金（编号51004084）；高等学校博士学科点专项科研基金（编号20105121120002）联合资助。 （）
