压力容器Issue(9)：20-23,4.DOI:10.3969/j.issn.1001-4837.2013.09.003
液压缸用高强钢焊接接头性能及组织研究
Mechanical Property and Microstructure of the High Strength Steel Welded Joint Used in Hydraulic Cylinder
周阿芳 1王志远 1韦金钰 1高二辉1
作者信息
- 1. 徐州徐工液压件有限公司，江苏徐州 221004
- 折叠
摘要
Abstract
The welding butt joint performance of the high strength steel used in hydraulic cylinder was re-searched .The result shows that:with small heat input and 600 MPa grade weld metarial ,the results of the tensile strength , impact value and cold bending property are good .Although the carbon equivalent of 20MnTiB is lower than that of 45#,20MnTiB is more inclined to harden,and in HAZ,most of the struc-tures is the lower carbon martensite .With proper heat input ,20 MnTiB can be used in manufacturing of the hydraulic cylinder .关键词
20MnTiB/焊接性能/金相组织Key words
20MnTiB/welding performance/metallographic structures分类
机械制造引用本文复制引用
周阿芳,王志远,韦金钰,高二辉..液压缸用高强钢焊接接头性能及组织研究[J].压力容器,2013,(9):20-23,4.
