云南化工Issue(2)：46-48,3.DOI:10.3969/j.issn.1004-275X.2014.02.014
浸润剂的制备及对3D打印产品力学性能的影响
Preparation of Infiltrations and their Effect on the Mechanical Properties of PMMA by 3 D Printing
摘要
Abstract
Infiltrations were prepared with epoxy and acrylic as main raw materials,respectively.PM-MA specimens were treated with the infiltrations and wax.The mechanical performances of the infiltrations on PMMA specimens for 3D printing were studied.The results demonstrated that reactive infiltrations could significantly strengthen the products modeling by 3D printing such as SLS and BJT,and the mechanic of PM-MA infiltrated with epoxy was better than that of PMMA infiltrated with acrylic after post-processing.More-over,the viscosity affected the epoxy infiltration visibly.关键词
浸润剂/3D打印/环氧树脂/丙烯酸Key words
infiltration/3D printing/epoxy/acrylic/strengthen分类
化学化工引用本文复制引用
李在兴,李丽..浸润剂的制备及对3D打印产品力学性能的影响[J].云南化工,2014,(2):46-48,3.
